Modifications

These plates will allow you to eliminate the oil cooler or block off existing oil hole for other applications. Made from billet aluminium.
EXT-10023 Aluminium Oil Cooler Blanking Plate  (each)

This kits includes;
1 x Flexible braided oil pressure hose, 250mm long, 1/8 BSP FML.
1 x Hayabusa oil pressure adaptor.
1 x Sealer Ring
EXT-10025 Oil Pressure Adaptor Kit

Oil cooler fittings
JIC/8
EXT-10026 Oil Cooler Fittings JIC/8

Oil cooler fittings
JIC/10
EXT-10036 Oil Cooler Fittings JIC/10

This H/Duty stop Pin is designed to prevent breaking the 6mm thread, also the pin is longer so that the stopper plate dosn't spring over the end of the pin. To upgrade your existing selector drum stop pin ,it is neccessary to drill out the selector cam plate and the selector drum then tap a 8mm thread in the end of the drum instead of the origional 6mm.

EXT-10021 Upgraded Selector Drum Stop Pin

EXT-10029 Water Outlet Blanking Plug

This H/Duty Gear Change Spring is 10% stronger than the origional Hayabuse spring, designed to give a more positive gear selection. It is aimed more at the car application than the bikes, simply because most car applications have a greater leverage so therefore need a stronger spring.

EXT-10020 Heavy Duty Gear Change Spring

Hayabusa Ignition Rotor Removal Tool.
Genuine Suzuki Part 09930-30450 RRP £33.95
EXT-10037 Hayabusa Ignition Rotor Removal Tool

6mm Spacer Plate for Hayabusa Cam Chain Tensioner
99-07
EXT-10038 6mm Spacer Plate For Hayabusa Cam Chain Tensioner 99-07

Hayabusa Thermostat O Ring 99 Onwards
EXT-10039 Hayabusa Thermostat O Ring 99 Onwards

Replacement Belleville Washer for Billet Idler Gear
Standard 1.75mm
EXT-10040 Replacement Belleville Washer for Billet Idler Gear 1.75mm

Replacement Belleville Washer for Billet Idler Gear
2.5mm Fitted with Heavy Duty Starter Motor.
EXT-10041 Replacement Belleville Washer for Billet Idler Gear 2.5mm